Oppstart AMS 0.35um

From Nanoelektronikk

Jump to: navigation, search

Oppstart på Linux

To run Cadence remote, use the login cluster rh5login.ifi.uio.no with the command:

ssh -Y rh5login.ifi.uio.no

Design kit 4.10

To run Cadence with the AMS 0.35um 4.10 kit add the following to your .bashrc file located in the root of your home directory.

You might already have this first part that concerns licensing:

#License
export LM_LICENSE_FILE=5370@lisens.ifi.uio.no
export LM_LICENSE_FILE=${LM_LICENSE_FILE}:5370@lisens.ifi.uio.no
#EndLicense

And here for the Cadence/AMS setup. Take Note: It is not a good idea to fill the file in question with to much rubish, it will interfere with other Cadence setups. So remember to comment these things out or make a separate file for your AMS needs, and then source that file as you need it.

#Cadence AMS

AMS_DIR=/ifi/asgard/project0/nanos/design_kit/AMS_C035_HK410
CDSDIR=/projects/nanos/programs/Cadence614OA
CDS_MMSIM_DIR=/ifi/asgard/project0/nanos/programsrhel6/MMSIM121
CDS_INST_DIR=/ifi/asgard/project0/nanos/programsrhel6/IC616
QRC_HOME=/ifi/asgard/project0/nanos/programs/INCISIV121
ASSURAHOME=/projects/nanos/programsrhel6/ASSURA41
#MGC_HOME=/ifi/asgard/project0/nanos/programsrhel6/Mentor/Calibre/aoi_cal_2013.4_15.12
IUSDIR=/ifi/asgard/project0/nanos/programsrhel6/INCISIV131 

CDS_Netlisting_Mode=Analog
#QRC_ENABLE_EXTRACTION=t
#$QRC_HOME/tools/bin
PATH=$QRC_HOME/tools/bin:$AMS_DIR/cds/bin:$AMS_DIR/programs/bin:$CDS_MMSIM_DIR/tools/bin:$CDSDIR/tools/dfII/bin:$CDSDIR/tools/bin:$ASSURAHOME/tools/bin:$ASSURAHOME/tools/assura/bin:$PATH

if [ $?LD_LIBRARY_PATH == 0 ]
 then
  LD_LIBRARY_PATH=$ASSURAHOME/tools/lib
 else
  LD_LIBRARY_PATH=$ASSURAHOME/tools/lib:${LD_LIBRARY_PATH}
fi

export QRC_HOME CDSDIR AMS_DIR CDS_MMSIM_DIR CDS_INST_DIR ASSURAHOME MGC_HOME LD_LIBRARY_PATH IUSDIR

#End Cadence AMS

Then you need to make a new folder for this project.

For Cadence to work with the current AMS setup you need to log on to a machine with an older version of RedHat. Use the following command to do that:

ssh -Y rh5login.ifi.uio.no

Then start with the command the first time:

ams_cds -tech c35b4
(Depending on what kind of candence setups you have set up before you might have to run this command twice the first time.)

Later you just need to type:

ams_cds

When asked about the exact technology you are going to use select:

C35B4C3

Design kit 3.70

Do NOT use for new project.

Kopier og kjør oppstartsskriptet

/hom/mes/cadsoft/des_kits/ams3.70/amslnx35.csh

fra din lokale Cadence AMS 0.35um-katalog.

Personal tools